Bloodborne Pathogens
This course provides training as required by OSHA's Bloodborne Pathogens Standard (29CFR 1910.1030). Material covered in the course includes definitions of bloodborne pathogens, modes of tranmission, universal precautions, engineering and work practice controls, exposure control plans, hepatitis B vaccinations, and other information needed to ensure worker safety.

This course can be used as introductory training as well as satisfy OSHA's annual refresher requirement.

Note that the standard requires an opportunity for you to ask interactive questions and receive answers from the person conducting the training session. OSHA was asked if having a trainer available to answer any questions via email was considered to be in compliance with this requirement. In an interpretation letter OSHA states that "it is critical that trainees have an opportunity to ask and receive answers to questions where material is unfamiliar to them. Frequently, a trainee may be unable to go further with the training or to understand related training content until a response is received." Therefore, it is OSHA's policy that using an email system to answer questions is NOT considered direct access to a qualified trainer. If the qualified trainer is available through an interactive on-line exchange or via phone communication whenever a question arises, this is considered acceptable.

This training course complies with the requirement by having an online chat (AOL screen name: eduwhere) available at 9 am -11 am (Eastern Time) every Wednesday and a toll free number to call if you have questions (866-523-9108). [more info]

Control of Hazardous Energy (Lockout/Tagout)
This course provides training as required by OSHA's Control of Hazardous Energy (Lockout/Tagout) Standard (29CFR 1910.147). Material covered in the course includes a thorough review of the Standard, its applications and limitations and major compliance requirements including training, assistance in identifying responsible staff, and preparation and organization of an equipment inventory, You will also gain valuable information needed for the development, implementation, and upkeep of an effective Lockout/Tagout Program. [more info]

DOT Hazardous Materials Shipping for Environmental Professionals
Environmental professionals responsible for shipping supplies, equipment and samples related to hazardous waste site investigation and remediation may be required to meet the DOT's regulations for shipping hazardous materials. This web-based, online course will discuss the fundamentals of shipping hazardous materials and hazardous wastes and discuss quantity exemptions and exceptions which may apply to environmental samples. Some samples will be classified as hazardous materials. Individuals shipping these items must comply with the Hazardous Materials Regulations. The regulations require individuals to receive initial training and be retrained at least once every 3 years. This course is based on the requirements for training as specified in 49 CFR 172 Subpart H, including testing of participants. [more info]

DOT Hazardous Materials Transportation
This course covers the fundamentals of shipping hazardous materials by ground. Our 10-step approach encompasses the activities which must be addressed when preparing a hazardous material for shipment. Participants will learn how to classify hazardous materials, select proper packaging, mark and label containers, and prepare required shipping documents, all in accordance with the USDOT regulations. New requirements enacted over the past year are highlighted throughout the course.

The USDOT requires training for anyone who handles hazardous materials including individuals who ship or receive hazardous materials, prepare hazardous materials for transportation, mark and label containers, complete shipping documents, select packaging and load or unload hazardous materials.

This course is designed to meet the training requirements as specified in 49 CFR 172.700 Subpart H, which specify that employees must be trained at least once every three years. At the completion of the course, participants will receive a certificate which includes the participants name, completion date, and copy of the test scores. The certificate includes the name and address of the trainer as required for recordkeeping.

This course is based on the requirements for training as specified in 49 CFR 172 Subpart H, including testing of participants. While this course is meant to satisfy DOT's general training requirements, it does not go into detail on the shipping of radioactive materials. This course does not cover driver training as required for each hazmat employee who will operate a motor vehicle. [more info]

Entrenamiento en Comunicación de Riesgos (HazCom)
Para proteger a los trabajadores expuestos a los productos químicos peligrosos en todos los sectores industriales, el Gobierno Federal estableció el Estándar de la Comunicación de Riesgos de la OSHA (HazCom) 1910.1200, también conocido como la ley de "derecho a saber". Este estándar se basa en un concepto simple: los empleados tienen la necesidad y el derecho de conocer los riesgos y la identificación de los productos químicos a los que están expuestos al laborar. Este curso está diseñado para asistir a las empresas y a los empleados a aprender sobre los riesgos del trabajo y cómo protegerse a sí mismos. [more info]

Hazard Communication (HazCom)
To protect these workers exposed to hazardous chemicals in all industrial sectors, the Federal Government established the OSHA Hazard Communication Standard (HazCom) 1910.1200, also known as the "right to know" law. This standard is based on a simple concept: that employees have both a need and a right to know the hazards and the identities of the chemicals they are exposed to when working. This course is designed to assist both employers and employees in learning about work hazards and how to protect themselves.

This course includes a free trial of C2's MSDS Administrator software. [more info]

Hazardous Waste Management and Shipping for Environmental Professionals
This web-based, online DOT-RCRA hybrid course includes a history and overview of hazardous waste management laws and regulations, a guide to complying with the myriad of hazardous waste regulations including how to recognize hazardous wastes, how to manage waste correctly on site, how to properly select, label and mark waste containers, how to prepare shipments for transport to treatment, storage and disposal facilities, and how to properly keep records for compliance and enforcement. The course is designed to assist facilities to meet the annual training requirements for generators of hazardous waste, such as those requirements presented in 40 CFR 265.16, 40 CFR 264.16 and 40 CFR 262.34.

In addition, this course includes a discussion of the DOT's regulations for shipping supplies, equipment and samples related to hazardous waste site investigations and remediation activities which is based on the requirements for training as specified in 49 CFR 172 Subpart H, including testing of participants. [more info]

IATA Dangerous Goods
Our IATA Dangerous Goods training course has been designed with specific exercises related to the transportation of dangerous goods by air from a shippers perspective. This course covers the fundamentals of shipping dangerous goods by air according to the IATA regulations. Our 10 step approach encompasses all of the activities which must be addressed when preparing a dangerous goods for shipment by air. This course has been updated to include recent changes to the regulations, using the 51st Edition (2010) of the IATA Dangerous Goods Regulations.

The course is designed to help employers meet the requirements for training as specified in Section 1.5 of the IATA Dangerous Goods Regulations and 49 CFR 172 Subpart H, including testing of participants. This course does not cover the more detailed requirements for the shipment of radioactive materials under the IATA regulations.

In order to follow along with the examples and exercises presented in the course, you must have access to a copy of the IATA Dangerous Goods regulations. If you are in need of an up-to-date version of the regulations, you can select to include the price of the book in your registration fee or call us at (919) 246-4847 to order a copy separately. [more info]

IATA Productos Peligrosos
"Capacitación en Productos Peligrosos por Regulaciones de la IATA" se ha diseñado con los ejercicios específicos relacionados con el transporte de productos peligrosos por el aire de una perspectiva de los expedidores. Este curso cubre los fundamentos de los productos peligrosos del envío por aire según las Regulaciones del IATA. Nuestro acercamiento de 10 pasos abarca todas las actividades que deben ser tratadas al prepararse los productos peligrosos para el envío por el aire. Este curso se ha puesto al día para incluir cambios recientes a las regulaciones, usando la Edición 49 de las Regulaciones de los Productos Peligrosos del IATA.

El curso se diseña para ayudar a empresarios a resolver los requisitos para el entrenamiento según lo especificado en la sección 1.5 de las regulaciones peligrosas y de 49 CFR 172 Subpart H de las mercancías del IATA, incluyendo la prueba de participantes. Este curso no cubre los requisitos más detallados para el envío de materiales radiactivos bajo regulaciones del IATA.

Para seguir junto con los ejemplos y los ejercicios presentados en el curso, usted debe tener acceso a una copia de las regulaciones peligrosas de las mercancías del IATA. Si usted está en necesidad de una versión actualizada de las regulaciones, usted puede seleccionar para incluir el precio del libro en su honorario de registro o para llamarnos en (919) 246-4847 para pedir una copia por separado. [more info]

Laboratory Audit Essentials
Data generated by environmental laboratories are used to make strategic decisions for all types of projects (investigation, remediation, compliance, etc.). It is vitally important that the data are of the highest quality to avoid costly resampling and budget overruns. The goal of this course is to provide information so that an individual can conduct an audit of an environmental laboratory. A laboratory audit ensures that the laboratory has quality systems in place, follows good laboratory practices, and generates data of integrity and quality. This course will help you conduct your own environmental laboratory audit. [more info]

Laboratory Safety and Chemical Hygiene
In this course, you will learn about the requirements employers must meet to ensure a safe laboratory environment for their employees. It also walks you through creating an effective and comprehensive Chemical Hygiene Plan including basic components, general laboratory safety practices, facility and operation safety rules, chemical hazard identification, and other general safety topics that relate to laboratories.

OSHA (Occupational Safety & Health Administration) has tailored a standard for occupational exposure to hazardous chemicals in laboratories referred to as the Laboratory Standard which is found in Title 29 of the Code of Federal Regulations Part 1910, Subpart Z, Section 1450 (29CFR 1910.1450). Under this standard all operations that meet the OSHA definition of a laboratory are subject to the Laboratory Standard. [more info]

Métodos de Muestreo de la Chimenea de EPA 1 - 5
La Agencia de Protección Ambiental de los E.E.U.U. (EPA) regula las emisiones de partículas en el aire debido a las condiciones peligrosas que estas partículas crean, induciendo problemas tales como enfermedad respiratoria, la lluvia ácida, y el cambio del clima. Métodos 1-5 de EPA procedimientos del contorno para determinar emisiones de partículas de fuentes inmóviles tales como empresas eléctricas y otras instalaciones industriales de modo que poder reducir al mínimo efectos dañosos sobre salud y el ambiente. Estos métodos aparecen en el Título 40, Parte 60 del Código de las Regulaciones Federales (designadas 40 CFR 60). [more info]

MSHA Part 46 Refresher
This course is designed to assist you in meeting Mining Safety and Health Administration (MSHA) Part 46 annual refresher requirements. Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines. If your work is in other MSHA regulated operations or you are an independent contractor that operates in other types of mining operations, you may be required to complete Part 48 training instead.

Whether you are a miner or an independent contractor, there are sections within the Part 46 training that must address issues of your specific operation. This course offers special instruction that will help you do that as well as provide training for the more generic MSHA recommended topics. In addition, it will help you accomplish your ultimate goal beyond MSHA compliance: to keep you safe in mine work areas.

You should be aware of what regulations cover your activity at the mine. There may be additional training requirements or stipulations not covered here.

You must have a copy of your company's training plan or know the time constraints for each topic of study and be sure your study meets the minimum hours outlined in your particular plan. Note that while this course covers the majority of subjects recommended for the refresher training, you must also fulfill some of the training requirements outside the scope of this course. For example, the regulations (46.8(b)) require a review of your site-specific hazards. The total time of study spent on the refresher must be a minimum of eight hours.

The course design here closely matches the template for Part 46 training provided by MSHA. When completed, your training will need to be certified by the person in your company responsible for mine safety and health training. [more info]

OSHA 8 Hour Hazwoper Refresher
The goal of this OSHA mandated training is to provide personnel involved with the clean-up of hazardous waste sites the knowledge to safely work in a hazardous environment.

This course is intended to assist in satisfying the annual training requirement of the Hazardous Waste Operations and Emergency Response (HAZWOPER) rule, found in Title 29 of the Code of Federal Regulations Part 1910.120. The standard was specifically developed to protect workers that may be exposed to hazardous waste at uncontrolled hazardous waste sites and at EPA licensed waste treatment, storage and disposal facilities; as well as workers responding to emergencies involving hazardous materials, such as spills. [more info]

RCRA and DOT Refresher
This is a unique DOT-RCRA hybrid "refresher" course. The course includes an overview of hazardous waste management laws and regulations, a guide to complying with the myriad of hazardous waste regulations including how to recognize hazardous wastes, how to manage waste correctly on site, how to properly select, label and mark waste containers, how to prepare shipments for transport to treatment, storage and disposal facilities, and how to properly keep records for compliance and enforcement.

In addition, this course includes a review of the DOT's regulations for shipping hazardous materials, including the Hazardous Materials Table (HMT), proper shipping name, hazard classes, marking and labeling, shipping papers, packing groups, and security.

The course is designed to help meet the annual training requirements for generators of hazardous waste, such as those requirements presented in 40 CFR 265.16, 40 CFR 264.16 and 40 CFR 262.34. It is also designed to assist with the recurring training requirements specified in 49 CFR 172 Subpart H, including testing of participants. [more info]

RCRA Hazardous Waste Management for Generators
The Hazardous Waste Management Online Course provides a detailed discussion of federal solid and hazardous waste management laws and regulations that affect businesses. The course includes a history and overview of hazardous waste management laws and regulations, a guide to complying with the myriad of hazardous waste regulations including how to recognize hazardous wastes, how to manage waste correctly on site, how to properly select, label and mark waste containers, how to prepare shipments for transport to treatment, storage and disposal facilities, and how to properly keep records for compliance and enforcement.

Information on how to comply with the 2006 Hazardous Waste Manifest changes are also included.

The course is designed to assist facilities to meet the annual training requirements for generators of hazardous waste, such as those requirements presented in 40 CFR 265.16, 40 CFR 264.16 and 40 CFR 262.34. [more info]

Shipping Infectious Substances (IATA and DOT)
This course covers the fundamentals of shipping infectious substances and diagnostic specimens. Our 7 step approach encompasses all of the activities which must be addressed when preparing a hazardous material for shipment. This course has been updated to include recent changes to the regulations, including HM-215D. The course also covers shipments containing dry ice.

• Infectious Substances, Category A (UN 2814 and UN 2900),
• Biological Substances, Category B (UN 3373),
• Patient Specimens, and
• Carbon dioxide, solid (dry ice), Class 9 (UN 1845)

Stack Sampling Methods 1-5
US-EPA Methods 1-5 are sampling methods developed for sampling of particulate emissions from stationary sources such as power plants and other industrial facilities. These methods appear in title 40, part 60 of the Code of Federal Regulations (referred to as 40 CFR 60). This course serves as an introduction to the methods and provides a basic understanding of the concepts, equipment, procedures and calculations used in the methods. Helpful hints and suggestions are also incorporated into the material. [more info]